To access this post, you must purchase International Membership, Life Member, Sustaining Member or Regular Member.
This E.C.O covers the installation of bushings to the aileron bellcranks in the 2-22. Schweizer engineering has also approved this repair for all 1-26 model aileron bellcranks.(11 Sept 1984) ...
This E.C.O covers the installation of bushings to the aileron bellcranks in the 2-22. Schweizer engineering has also approved this repair for all 1-26 model aileron bellcranks.(11 Sept 1984) ...
These Service Bulletins and Service Letters have been provided by K & L Soaring. The 1-26 Association has reproduced these documents in an electronic form with the permission of K & L Soarin...
Subject: Tow-release installation – Applies to models (including kit built) SGU 1-7; SGS 2-8 (TG-2); SGS 2-12 (TG-3); SGU 1-19; SGU 1-20; SGU 1-21; SGU 2-22, 2-22A, 2-22C, 2-22CK, 2-22E, 2-22EK; SGS 1...
Subject: Inspect tow-release installation – Applies to models (including kit built) SGU 1-7; SGS 2-8 (TG-2); SGS 2-12 (TG-3); SGU 1-19; SGU 1-20; SGU 1-21; SGU 2-22, 2-22A, 2-22C, 2-22CK, 2-22E, 2-22E...
From: Kevin Renshaw I have made both tailcones and nosecones. Here is the method I used to make the tail cone that is on 217: Get a block of blue styrofoam (2 lb/cu ft) at least the size of the tail...
From: Monroe S. David Here are PDF’s of the pattern I used to fabricate the Stick Boot in the Legal Eagle this year. Downloads: Stick Boot Design Stick Boot Pattern To access this post, y...
From: Charles Shaw (038) Making a 1-26 Rear Canopy Radio Antenna worked out pretty neat and easy with help from Jerry Kaufman. Materials: Music wire as large a diameter as will mate with Panel Mount...
To access this post, you must purchase International Membership, Life Member, Sustaining Member or Regular Member.